SHAIC HS-340
SHAIC HS-340 is a heat-shrinkable wraparound sleeve designed for corrosion protection of field-welded joints of plastic coated steel pipelines. It has a thick crosslinked polyethylene backing coated with butyl rubber based mastic sealant or hot melt adhesive. Hot Melt or Mastic shall depend on project requirements. When heated the backing layer shrinks and the sealant and the sealant flowsand forms a reliable corrosion protection seal onto metal and adjacent coating surfaces.
Cut Sleeve is normally supplied with separate Patch Closure, which is coated with a high shear-strength adhesive; however, there are different types and sizes to comply with individuals requirements. It is supplied in bulk rolls as well, and has superheavy duty, heavy duty and regular thickness.
SHAIC HS-3401HT 80
SHAIC HS-3401HT 80: three-layer heat shrinkable wraparound sleeve is designed for field welded joint protection with epoxy primer of plastic coated steel pipelines. It has a thick crosslinked polyethlene backing coated with heat sensitive adhesive and two part liquid epoxy primer. Max. operations temperature: 80°C
Apply epoxy primer to the pipe surface and then adhesive flows and forms a reliable corrosion protection seal onto epoxy and adjacent coating surfaces.
SHAIC HS-3402
SHAIC HS-3402: a heat shrinkable wraparound sleeve designed for corrosion protection of field-welded joints of coated steel pipelines. It has a thick crosslinked polyethylene backing coated with butyl rubber based mastic sealant or hot melt adhesive. Hot Melt or Mastic shall depend on project requirements. When heated the backing layer shrinks and the sealant flows and forms a reliable corrosion protection seal onto metal and adjacent coating surfaces. Max. operations temperature: 100°C
Cut Sleeve is normally supplied with separate Patch Closure, which is coated with a high shear-strength adhesive; however, there are different types and sizes to comply with individual requirements. It i supplied in bulk rolls as well, and has superheavy duty, heavy duty and regular thickness.
Need a quotation or advice on our
products and services?
MAXXUN ENGINEERING SDN BHD
31, Jalan Anggerik Mokara 31/58
Kota Kemuning, Seksyen 31,
40460 Shah Alam, Selangor
Email : inquiry@maxxuneng.com
Tel : +03-5525 8999
+03-5525 8999
inquiry@maxxuneng.com
